2020 Toyota Highlander Hybrid Check Engine Light

2020 Toyota Highlander Hybrid Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several typical causes including something as simple as a loose gas cap. Other usually typical reasons for a Check Engine Light are faulty emissions control part, broken head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, or broken spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Mechanics and the certified service protocol to isolate the root problem and absolutely repair it as necessary to restore factory specifications. When this results, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was entirely fixed.

Every 2020 Toyota Highlander Hybrid was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its vital systems. The speedy sensors are continually detecting conditions while sending important data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Yet, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what specifically is wrong nor what to do about it. That’s where we come in; Toyota of Greenville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Certified Service professional.

Is it safe to drive your 2020 Toyota Highlander Hybrid with the check engine light on?

If the check engine light is flashing, this means that there is a serious issue and it is advised to service your Toyota Highlander Hybrid promptly. This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is usually indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more serious problem. Call the experts at Toyota of Greenville by dialing 8647547866 so you can describe the issues. Or reduce your speed and bring your 2020 Toyota to our certified mechanics as soon as likely.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2020 Toyota Highlander Hybrid is the check engine light. The check engine light is part of the important onboard diagnostics system, and displays in a wide range of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a wide range of things for your 2020 Toyota Highlander Hybrid. Some of these essential duties include controlling engine speed, shifting automatic transmissions ignition timing, and implementing security control, just to name a few. With that being said, the check engine light can mean an assortment of different things. It can be as simple as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2020 Toyota Highlander Hybrid, contact Toyota of Greenville. Our Toyota service department can support you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Toyota of Greenville today!

How many miles can you drive with the check engine light?

Since every check engine code has its own level of severity, it is ordinarily difficult to predict how many miles you can be secure in driving with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we endorse that you pull over and contact Toyota of Greenville to help determine if your vehicle is secure to drive in or if we endorse a tow truck.

2020 Toyota Highlander Hybrid Check Engine Light Codes

The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Highlander Hybrid. There are hundreds of different codes that your check engine light can accurately represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your car and will also allow that essential Check Engine Light to do what it is really supposed to do: be your guide. Sadly, obvious and useful car symptoms do not constantly accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

• Bad Spark Plugs
• Loose Gas Cap or Missing Gas Cap
• Old Battery
• Transmission issues
• Computer output circuit issues
• Fuel and air metering systems problems
• Ignition system faults
• O2 Sensor
• Emissions controls issues

This is why it is important for someone who does not have a lot of predominant automotive knowledge to not assume what a code means. If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away. Call Toyota of Greenville at 8647547866 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a skillful certified Toyota mechanic.

What could cause the check engine light to come on in a 2020 Toyota Highlander Hybrid?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could likewise be a warning of a meaningful problem that could cause serious damage to your engine and come with a hefty and costly repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow generally means something less serious but a flashing check engine light signifies that your vehicle’s engine is in significant trouble and helpful service is necessary expeditiously. If your check engine light is flashing in your 2020 Toyota Highlander Hybrid, we exceedingly advise not to drive the vehicle and schedule Toyota service today. Below is a list of the most typical reasons your check engine light can come on:

• The battery is low or dead. The battery in your 2020 Toyota Highlander Hybrid is each important. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Highlander Hybrid is what determines how much fuel is required to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota Highlander Hybrid is having trouble starting, idling rough or has a sudden fast change in the position of the throttle pedal, this could be a vital sign of a faulty mass airflow sensor.
• Your 2020 Toyota Highlander Hybrid has a vacuum leak. Each Toyota Highlander Hybrid has a vacuum system that performs a wide variety of functions. The vacuum system likewise helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, particularly if they’re exposed to intense heat or extreme cold.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2020 Toyota Highlander Hybrid if it’s not installed perfectly. These aftermarket components and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound familiar, bring your Highlander Hybrid to Toyota and have our team of accomplished certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, particularly aftermarket parts and accessories, or utilizing OEM components first place might cost a little bit more but could assist you save substantially from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more rapidly and your vehicle will be less efficient when it comes to fuel economy. So what results if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause meaningful damage to your catalytic converter and your 2020 Toyota Highlander Hybrid's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the precisely correct combination of air and fuel that enters the cylinders in your engine. A faulty O2 sensor can likewise cause a vehicle to fail an emissions test.
• New Spark Plugs or Plug Wires are required for your 2020 Toyota Highlander Hybrid. The spark plugs are the part of your engine that ignites the air/fuel combination in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience a conspicuous poor performance and decreased power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause blocked catalytic converter or damage to ignition coils and O2 sensors, leading to more pricey repairs.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Toyota Highlander Hybrid’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A broken catalytic converter is normally caused by invariably neglected maintenance, which is why Toyota of Greenville offers a free multi-point check with each Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Toyota Highlander Hybrid will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other delicate problems from overheating.
• One of the most common and frequent cause is that your 2020 Toyota Highlander Hybrid gas cap is loose, broken or missing. The gas cap for your 2020 Toyota Highlander Hybrid serves numerous purposes. It prevents unpredictable gas fumes from being released when you aren't driving, it seals the fuel system and helps cultivate pressure within the fuel tank. What results if you have a faulty fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more expensive. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on swiftly after you put gas in your 2020 Toyota Highlander Hybrid, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

2020 Toyota Highlander Hybrid Check Engine Light

A flashing light indicates that the problem is very serious and if not taken care of swiftly may result in extensive and meaningful damage to the vehicle. If the check engine light in your 2020 Toyota Highlander Hybrid starts flashing, that means that the problem needs attention swiftly and your Toyota should be brought in expeditiously. This blinking light ordinarily signifies a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an costly and huge repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A broken, old or dirty spark plug can cause the engine to misfire. If your check engine light is regularly flashing, please contact our team of automotive experts at Toyota of Greenville expeditiously by calling 8647547866. If the problem is completely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Will the check engine light reset itself?

The check engine light on your 2020 Toyota Highlander Hybrid will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will quickly turn itself off. Also, if your catalytic converter is working perfectly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Toyota Highlander Hybrid light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Toyota of Greenville so the light and code can be double-checked and reset.

Check Engine Light Service 2020 Toyota Highlander Hybrid

What do you do when you’re driving along in your Toyota Highlander Hybrid and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks drastically because you may have explicitly idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, serene breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is suggested that you get your 2020 Toyota Highlander Hybrid checked quickly. Ignoring that warning could end up causing major, huge damage to pricey engine parts.

When your 2020 Toyota Highlander Hybrid's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t appropriate, a computer turns on your check engine light. This amber or yellow light is usually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can promptly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Toyota of Greenville. There are likewise a number of essentially inexpensive code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the exactly correct issue and repair it.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The good news, Toyota of Greenville offers completely complimentary multi-point inspections and free diagnostics, in most cases, to assist determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis.